EasyManua.ls Logo

HP Pro 4300 - Replacing the Battery

HP Pro 4300
133 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. Using your fingers, press the visible edge of the optical disc drive toward the side of the
computer to push the drive partially out of the computer. Grasp the front end of the drive and pull
the drive out of the computer.
Figure 6-11 Removing the optical disc drive
6. If you need to remove the drive bracket from the drive, remove the two screws (1) that secure
the bracket to the drive, and then remove the bracket from the drive (2).
NOTE: Optical drive spare part kits do not include replacement brackets.
Figure 6-12 Removing the optical drive bracket
To install an optical drive, reverse the removal procedures.
34 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis

Table of Contents

Related product manuals