Memory modules
Table 5-3 Memory module descriptions and part numbers
Description Spare part number
16 GB L67710-002
8 GB L46598-002
4 GB L10598-852
IMPORTANT: Before adding new memory, update the computer to the latest BIOS from www.hp.com. Failure
to update the computer to the latest BIOS prior to installing new memory may result in various system
problems.
Before removing the memory module, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 34).
2. Place the computer in Battery Safe mode (Battery Safe mode on page 34).
3. Remove the bottom cover (Bottom cover on page 36).
4. Remove the battery (Battery on page 35).
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.)
2. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch to prevent incorrect insertion into the memory
module socket.
Reverse this procedure to install a memory module.
38 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
