Speaker assembly
Table 5-8 Speaker assembly description and part number
Description Spare part number
Speaker assembly L44513-001
Before removing the speaker assembly, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 34).
2. Place the computer in Battery Safe mode (Battery Safe mode on page 34).
3. Remove the bottom cover (Bottom cover on page 36).
4. Remove the battery (Battery on page 35).
Remove the speaker assembly:
1. Disconnect the speaker cable from the system board (1).
2. Remove the two Phillips M2.0 × 6.0 screws (2) that secure the speakers to the computer.
3. Remove the speakers from the computer (3).
Reverse this procedure to install the speaker assembly.
46 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
