(6) USB cable from USB board (ZIF)
IMPORTANT: The USB cable is secured to the chassis with adhesive. Be sure to lift the USB cable to
release it from the chassis.
(7) Keyboard cable (ZIF)
(8) Card reader cable (ZIF)
(9) Touchpad cable (ZIF)
(10) Keyboard backlight cable (ZIF)
(11) Fingerprint sensor cable (reverse ZIF)
(12) Hard drive cable (ZIF)
2. Remove the three Phillips M2.0 × 4.0 screws (1) that secure the system board to the computer.
3. Remove the ve Phillips M2.0 × 2.5 screws (2) that secure the system board to the computer.
58 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
