3. Remove the display panel from the enclosure (2).
4. Rotate the display panel onto the keyboard (1) to gain access to the display cable connector on the back
of the panel.
5. Lift the tape from the connector on the display panel (2), disconnect the cable from the panel (3), and
then disconnect the cable from the touch control board (4). Remove the display panel (5).
The display panel is available as spare part number L78048-001 for FHD panels and L86962-001 for HD
panels.
62 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
