8. Remove the display panel (4).
Display panels are available as spare part number L78045-001 for FHD displays, L78047-001 for FHD,
privacy displays, and L78046-001 for HD displays.
9. Use the following steps to install a display panel:
a. Remove the backing from the bottom of the new tape to install in the display enclosure (1).
b. Locate the tape alignment marks, and then install the tape onto the left and right sides on the
inside of the enclosure (2).
c. Remove the backing from the top of the installed tape (3).
72 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
