10. If it is necessary to remove or replace the HD camera, disconnect the cable from the camera (1), and
then remove the module from the display (2).
The HD camera is available as spare part number L78049-001.
11. If it is necessary to remove or replace the IR camera, peel the camera module up to remove it from the
adhesive that secures it to the enclosure (1), and then disconnect the cables from the left (2) and right
(3) sides of the camera.
The HD + IR camera is available as spare part number L78050-001.
74 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
