3. Release the ZIF connector (3) the display panel cable is connected to, and then disconnect the
display panel cable from the system board.
4. Disconnect the speaker cable (4) from the system board.
5. Release the ZIF connector (5) the keyboard cable is connected to, and then disconnect the
keyboard cable from the system board.
6. Release the ZIF connector (6) the touchpad cable is connected to, and then disconnect the
touchpad cable from the system board.
7. Release the ZIF connector (7) the keyboard backlight cable is connected to, and then disconnect
the keyboard backlight cable from the system board.
8. Release the ZIF connector (8) the fingerprint reader cable is connected to, and then disconnect the
fingerprint reader cable from the system board.
9. Disconnect the display tuner cable (9) from the system board.
10. Release the ZIF connectors (10) the connector board cable and nano SIM cable are connected to,
and then disconnect the connector board cable and nano SIM cable from the connector board.
11. Detach the connector board cable (11) and nano SIM cable from the computer. The connector board
cable and nano SIM cable are attached to the computer with double-sided adhesive.
12. Remove the six PM2.0 × 1.8 screws (1) that secure the system board to the computer.
54
Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
