HP ProBook 5320m - Notebook PC User Manual

Replacing a hard drive
CAUTION: To prevent information loss or an unresponsive system:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by briefly pressing
the power button. Then shut down the computer through the operating system.
To remove a hard drive:
1. Save your work.
2. Shut down the computer and close the display.
3. Disconnect all external hardware devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the battery bay toward you.
6. Remove the battery from the computer.
7. Remove the 3 screws from the bottom of the computer.
Replacing a hard drive 69

HP ProBook 5320m - Notebook PC Specifications

General

RAM	Up to 8 GB DDR3
Display	13.3-inch diagonal LED-backlit HD anti-glare (1366 x 768)
Graphics	Intel HD Graphics
Operating System	Windows 7 Professional
Wireless	802.11a/b/g/n, Bluetooth
Webcam	2 MP webcam
Storage	128 GB SSD
Battery	4-cell (41 WHr) Li-Ion
Chipset	Mobile Intel HM57 Express
Audio	Stereo speakers, microphone
Ports	USB 2.0, VGA, headphone/microphone combo
Processor	Intel Core i5-450M / Intel Core i3-350M
Dimensions	32.6 x 22.5 x 2.3 cm