HP ProBook 5320m - Notebook PC User Manual

9 Memory modules
The computer has one memory module slot, which is located on the bottom of the computer, inside the
hard drive bay. The memory capacity of the computer can be upgraded by replacing the existing memory
module in the memory module slot.
WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord
and remove all batteries before installing a memory module.
CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any
procedure, touch a grounded metal object to be sure that you are discharged of static electricity.
To add or replace a memory module:
1. Save your work.
2. Shut down the computer and close the display.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by briefly
pressing the power button. Then shut down the computer through the operating system.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface.
6. Remove the battery from the computer.
81

HP ProBook 5320m - Notebook PC Specifications

General

RAM	Up to 8 GB DDR3
Display	13.3-inch diagonal LED-backlit HD anti-glare (1366 x 768)
Graphics	Intel HD Graphics
Operating System	Windows 7 Professional
Wireless	802.11a/b/g/n, Bluetooth
Webcam	2 MP webcam
Storage	128 GB SSD
Battery	4-cell (41 WHr) Li-Ion
Chipset	Mobile Intel HM57 Express
Audio	Stereo speakers, microphone
Ports	USB 2.0, VGA, headphone/microphone combo
Processor	Intel Core i5-450M / Intel Core i3-350M
Dimensions	32.6 x 22.5 x 2.3 cm