HP ProCurve 1810G-8 User Manual

2-10
Installing the Switch
Installation Procedure
When a network cable from an active network device is connected to the port,
the port LEDs for that port should go on (if Green Mode is not enabled). If the
port LEDs do not go on when the network cable is connected to the port, see
“Diagnosing with the LEDs” on page 4-2.

HP ProCurve 1810G-8 Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000 entries
VLAN Support	Yes
Management	Web-based GUI
Throughput	11.9 Mpps
Jumbo Frame Support	Yes
Ports	8 x 10/100/1000
Weight	2.2 lbs
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	15% to 95% non-condensing
Form Factor	Desktop, Rack-mountable