HP ProCurve 2510G Series User Manual

6-5
Configuring Secure Shell (SSH)
Prerequisite for Using SSH
Prerequisite for Using SSH
Before using the switch as an SSH server, you must install a publicly or
commercially available SSH client application on the computer(s) you use for
management access to the switch. If you want client public-key authentication
(page 6-2), then the client program must have the capability to generate or
import keys.
Public Key Formats
Any client application you use for client public-key authentication with the
switch must have the capability export public keys. The switch can accept
keys in the PEM-Encoded ASCII Format or in the Non-Encoded ASCII format.
Figure 6-3. Example of Public Key in PEM-Encoded ASCII Format Common for SSHv2 Clients
Comment
describing public
key identity.
Beginning of actual SSHv2
public key in PEM-Encoded
ASCII format.

HP ProCurve 2510G Series Specifications

General

Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Manageable	Yes
Storage Temperature	-40°C to 70°C
Ports	24 x 10/100/1000 ports
Memory	128 MB
Jumbo Frame Support	Yes
Layer	Layer 2
Features	VLAN, QoS, ACLs, IGMP snooping
Management	Web interface, CLI, SNMP
Security Features	RADIUS, TACACS+
Power Supply	Internal power supply
Operating Temperature	0°C to 45°C
Power over Ethernet (PoE)	Optional (PoE models available)