To Next Page

To Previous Page

3-18

Web and MAC Authentication

Configuring Web Authentication

Configure the Switch for Web-Based Authentication

Command Page

Configuration Level

aaa port-access web-based dhcp-addr 3-18

aaa port-access web-based dhcp-lease 3-18

[no] aaa port-access web-based [e] < port-list > 3-19

[auth-vid] 3-19

[client-limit] 3-19

[client-moves] 3-19

[logoff-period] 3-20

[max-requests] 3-20

[max-retries] 3-20

[quiet-period] 3-20

[reauth-period] 3-20

[reauthenticate] 3-20

[redirect-url 3-21

[server-timeout] 3-21

[ssl-login] 3-21

[unauth-vid] 3-22

Syntax: aaa port-access web-based dhcp-addr <ip-address/mask>

Specifies the base address/mask for the temporary IP

pool used by DHCP. The base address can be any valid

ip address (not a multicast address). Valid mask range

value is <255.255.240.0 - 255.255.255.0>.

(Default: 192.168.0.0/255.255.255.0)

Syntax: aaa port-access web-based dhcp-lease <5 - 25>

Specifies the lease length, in seconds, of the temporary

IP address issued for Web Auth login purposes.

(Default: 10 seconds)

Other manuals for HP ProCurve 2510G Series

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2510G Series and is the answer not in the manual?

General

Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Manageable	Yes
Storage Temperature	-40°C to 70°C
Ports	24 x 10/100/1000 ports
Memory	128 MB
Jumbo Frame Support	Yes
Layer	Layer 2
Features	VLAN, QoS, ACLs, IGMP snooping
Management	Web interface, CLI, SNMP
Security Features	RADIUS, TACACS+
Power Supply	Internal power supply
Operating Temperature	0°C to 45°C
Power over Ethernet (PoE)	Optional (PoE models available)