1-9
Getting Started
Need Only a Quick Start?
To Set Up and Install the Switch in Your Network
Important! Use the Installation Guide for your switch for the following:
■ Notes, cautions, and warnings related to installing and using the
switch
■ Instructions for physically installing the switch in your network
■ Quickly assigning an IP address and subnet mask, setting a Manager
password, and (optionally) configuring other basic features.
■ Interpreting LED behavior.
For the latest version of the Installation and Getting Started Guide and other
documentation for your switch, visit the ProCurve Networking Web site.
(Refer to “Product Documentation” on page xi of this guide for further
details.)
To Next Page
Loading...
