HP ProCurve 2510G Series User Manual

6-26
Configuring Secure Shell (SSH)
Further Information on SSH Client Public-Key Authentication
Syntax: copy tftp pub-key-file <ip-address> <filename> [<append | manager |
operator>]
Copies a public key file from a TFTP server into flash
memory in the switch.
The append option adds the key(s) for operator access.
The manager option adds the key(s) for manager access;
follow with the “append’ option to add the key(s).
The operator option replaces the key(s) for operator
access (default); follow with the 'append' option to add
the key(s).
show crypto client-public-key [<manager | operator>] [keylist-str]
[<babble | fingerprint>]
Displays the client public key(s) in the switch’s current
client-public-key file.
The manager option selects the manager public keys.
The operator option selects operator public keys.
The keylist-str option allows you to select keys to display
(a comma-delimited list).
The babble option converts the key data to phonetic
hashes that are easier for visual comparisons.
The fingerprint option converts the key data to hexadec-
imal hashes that are for the same purpose.

HP ProCurve 2510G Series Specifications

General

Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Manageable	Yes
Storage Temperature	-40°C to 70°C
Ports	24 x 10/100/1000 ports
Memory	128 MB
Jumbo Frame Support	Yes
Layer	Layer 2
Features	VLAN, QoS, ACLs, IGMP snooping
Management	Web interface, CLI, SNMP
Security Features	RADIUS, TACACS+
Power Supply	Internal power supply
Operating Temperature	0°C to 45°C
Power over Ethernet (PoE)	Optional (PoE models available)