To Next Page

To Previous Page

8-2

Configuring Port-Based and Client-Based Access Control (802.1X)

Contents

Option For Authenticator Ports: Configure Port-Security To Allow

Only 802.1X Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-40

Configuring Switch Ports To Operate As

Supplicants for 802.1X Connections to Other Switches . . . . . . . . . . . . . . 8-42

Displaying 802.1X Configuration, Statistics, and Counters . . . . . . . . . . . . 8-47

Show Commands for Port-Access Authenticator . . . . . . . . . . . . . . . . 8-47

Viewing 802.1X Open VLAN Mode Status . . . . . . . . . . . . . . . . . . . . . . 8-50

Show Commands for Port-Access Supplicant . . . . . . . . . . . . . . . . . . . 8-53

How RADIUS/802.1X Authentication Affects VLAN Operation . . . . . . . . 8-54

Messages Related to 802.1X Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-58

Other manuals for HP ProCurve 2510G Series

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2510G Series and is the answer not in the manual?

General

Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Manageable	Yes
Storage Temperature	-40°C to 70°C
Ports	24 x 10/100/1000 ports
Memory	128 MB
Jumbo Frame Support	Yes
Layer	Layer 2
Features	VLAN, QoS, ACLs, IGMP snooping
Management	Web interface, CLI, SNMP
Security Features	RADIUS, TACACS+
Power Supply	Internal power supply
Operating Temperature	0°C to 45°C
Power over Ethernet (PoE)	Optional (PoE models available)