HP ProCurve 2610 Installation And Getting Started Guide

1-4
Introducing the Switch
Front of the Switch
Introducing the Switch
Front of the Switch
ProCurve Switch 2610-48
Power
and Fault
LEDs
RPS, Fan and Test
Status LEDs
Switch port LEDs
LED Mode select button
and indicator LEDs
Reset and Clear
buttons
10/100Base-TX RJ-45 ports
1
Uplink ports
(1000Base-T
2
and mini-GBIC)
Console
Port
ProCurve Switch 2610-48-PWR
Reset and Clear
buttons
LED Mode select button
and indicator LEDs
10/100Base-TX RJ-45 ports
1
Uplink ports
(1000Base-T
2
and Mini-GBIC)
Switch port LEDs
RPS, EPS, Fan and
Test Status LEDs
Power
and Fault
LEDs
Console
Port
ProCurve Switch 2610-24
1
All 10/100Base-TX RJ-45 ports have the Auto-MDIX feature.
2
Two RJ-45 10/100/1000Base-T ports and two Mini-GBIC (SFP) slots.
Console
Port
Reset and Clear
buttons
Switch port LEDs
LED Mode select button
and indicator LEDs
10/100Base-TX RJ-45 ports
1
Uplink ports
(1000Base-T
2
and Mini-GBIC)
RPS and Test
Status LEDs
Power
and Fault
LEDs

HP ProCurve 2610 Specifications

General

Switching Capacity	12.8 Gbps
Forwarding Rate	9.5 Mpps
MAC Address Table Size	8000 entries
Layer	Layer 2
RAM	64 MB
Flash Memory	16 MB
Jumbo Frame Support	Yes
Manageable	Yes
Operating Humidity	15% to 95% non-condensing
Ports	24 x 10/100
VLANs	256
Management	Web, CLI, SNMP
Power Supply	Internal
Operating Temperature	0°C to 40°C
Dimensions (W x D x H)	17.42 x 12.73 x 1.73 in