HP ProCurve 2610 Installation And Getting Started Guide

2-34
Installing the Switch
Sample Network Topologies for PWR Switches
Installing the Switch
Connecting to a Backbone Switch Implementing PoE
Figure 2-25. Networking PoE switches to a gigabit ethernet backbone
To Gigabit-Ethernet
backbone
Wireless
Access Point
600 RPS/EPS
Switch 2610-48-PWR
Switch 2610-
48-PWR
Gigabit
fiber-optic
cable
Switch 5406zl
Switch 2610-48 non-PWR
Switch 2610-48 non-PWR

HP ProCurve 2610 Specifications

General

Switching Capacity	12.8 Gbps
Forwarding Rate	9.5 Mpps
MAC Address Table Size	8000 entries
Layer	Layer 2
RAM	64 MB
Flash Memory	16 MB
Jumbo Frame Support	Yes
Manageable	Yes
Operating Humidity	15% to 95% non-condensing
Ports	24 x 10/100
VLANs	256
Management	Web, CLI, SNMP
Power Supply	Internal
Operating Temperature	0°C to 40°C
Dimensions (W x D x H)	17.42 x 12.73 x 1.73 in