HP ProCurve 2824 User Manual

3-6
Configuring the Switch
Using the IP Address for Remote Switch Management
Configuring the Switch
For more information on using the web browser interface, please see the
Management and Configuration Guide, which is on the Documentation
CD-ROM that came with your switch.
An extensive help system is also available for the web browser interface. To
access the help system though the subnet on which the switch is installed you
must have access to the internet.

HP ProCurve 2824 Specifications

General

Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Layer	Layer 2
Rack Mountable	Yes
Jumbo Frame Support	Yes
Management	CLI, SNMP
Features	Link Aggregation, QoS
Dimensions	1.7 inches
Ports	24 x 10/100/1000