RADIUS Authentication and Accounting
Changing RADIUS-Server Access Order
To exchange the positions of the addresses so that the server at 10.10.10.003
will be the first choice and the server at 10.10.10.001 will be the last, you would
do the following:
1. Delete 10.10.10.003 from the list. This opens the third (lowest) position in
the list.
2. Delete 10.10.10.001 from the list. This opens the first (highest) position in
the list.
3. Re-enter 10.10.10.003. Because the switch places a newly entered address
in the highest-available position, this address becomes first in the list.
4. Re-enter 10.10.10.001. Because the only position open is the third position,
this address becomes last in the list.
Removes the “003” and “001” addresses from
the RADIUS server list.
Inserts the “003” address in the first position in
the RADIUS server list, and inserts the “001”
address in the last position in the list.
Shows the new order in which the switch
searches for a RADIUS server.
Figure 5-18. Example of New RADIUS Server Search Order
5-29
To Next Page
Loading...
Need help?
General