Getting Started
Applications for Access Control Lists (ACLs)
Applications for Access Control Lists
(ACLs)
Layer 3 IP filtering with Access Control Lists (ACLs) on the HP Procurve Series
5300XL switches enables you to improve network performance and restrict
network use by creating policies for:
■ Switch Management Access: Permits or denies in-band management
access. This includes preventing the use of certain TCP or UDP applica-
tions (such as Telnet, SSH, web browser, and SNMP) for transactions
between specific source and destination IP addresses. )
■ Application Access Security: : Eliminating unwanted IP, TCP, or UDP
traffic in a path by filtering packets where they enter or leave the switch
on specific VLAN interfaces.
ACLs can filter traffic to or from a host, a group of hosts, or entire subnets.
Note on ACL ACLs can enhance network security by blocking selected IP traffic, and can
Security Use
serve as one aspect of maintaining network security. However, because ACLs
do not provide user or device authentication, or protection from malicious
manipulation of data carried in IP packet transmissions, they should not
be relied upon for a complete security solution.
For information on how to apply ACLs in a network populated with HP
Procurve Series 5300XL switches, refer to the chapter titled “Access Control
Lists (ACLs)” in the Management and Configuration Guide for your Series
5300XL switch.
1-4
To Next Page
Loading...
Need help?
General