Getting Started
Related Publications
Screen Simulations
Figures containing simulated screen text and command output look like this:
Figure 1-1. Example of a Figure Showing a Simulated Screen
In some cases, brief command-output sequences appear without figure iden-
tification. For example:
HPswitch(config)# clear public-key
HPswitch(config)# show ip client-public-key
show_client_public_key: cannot stat keyfile
Keys
Simulations of actual keys use a bold, sans-serif typeface with square brackets.
For example, the Tab key appears as
[Tab] and the “Y” key appears as [Y].
Related Publications
Software Release Notes. Release notes are posted on the HP ProCurve
website and provide information on new software updates:
■ New features and how to configure and use them
■ Software management, including downloading software to the switch
■ Software fixes addressed in current and previous releases
To view and download a copy of the latest release notes for your switch, refer
to “Getting Documentation From the Web” on page 1-8.
Product Notes and Software Update Information. The Read Me First
shipped with your switch provides software update information, product
notes, and other information. A printed copy is shipped with your switch. For
the latest version, refer to
“Getting Documentation From the Web” on page 1-8.
Installation and Getting Started Guide. Use the Installation and Get-
ting Started Guide shipped with your switch to prepare for and perform the
physical installation. This guide also steps you through connecting the switch
to your network and assigning IP addressing, as well as describing the LED
indications for correct operation and trouble analysis. A PDF version of this
1-6
To Next Page
Loading...
Need help?
General