113
Software Fixes in Release L.10.01 - L.11.09
Release L.10.23
Release L.10.23
Versions L.10.21 and L.10.22 were never released.
Problems Resolved in Release L.10.23 (not a general release)
■ Enhancement — Support for the following products was added: J8768A, J9030A, J9033A,
and J9064A
Release L.10.24
Problems Resolved in Release L.10.24
■ CLI (PR_1000332352) — The output of a show int brief command should show the
negotiated flow control status rather than the flow control configuration setting.
■ CLI (PR_1000390970) — The command tftp-enable is removed from the CLI since that
functionality is served by tftp server|client.
■ CLI/config (PR_1000391119) — Copying a configuration file to a switch with a BPDU
protection timeout value set may produce an error similar to:
CCCCCline: 10007. 1200: Error setting configuration.
■ CLI/Show tech (PR_1000378957) — After a hotswap of chassis modules, the show tech
statistics value for the field “linked port on box” may be inaccurate.
■ CLI (PR_1000240838) — If an invalid time is entered using clock set command, the switch
responds with an “invalid date” error.
■ CLI (PR_1000199785) — The tab help function (command-completion) for “IP RIP authen-
tication” is inaccurate. The help selection lists “OCTET-STR Set authentication key” when it
should be “ASCII-STR Set RIP auhentication key (maximum 16 characters)".
■ CLI (PR_1000373443) — The CLI update command help text and confirmation message is
misleading and confusing.
■ Crash (PR_1000392863) — Switch may crash when setmib tcpConnState is used, with a
message similar to:
NMI event SW:IP=0x0079f4a0 MSR:0x00029210 LR:0x006dca60
Task='eTelnetd' Task ID=0x8a7cbb0 cr: 0x20000042 sp:0x08a7c871
■ Daylight savings (PR_1000364740) — Due to the passage of the Energy Policy Act of
2005, Pub. L. no. 109-58, 119 Stat 594 (2005), starting in March 2007 daylight time in the United
States will begin on the second Sunday in March and end on the first Sunday in November.
■ Enhancement (PR_1000373226) — Support was added for a future SFP transceiver.
■ Enhancement (PR_1000335860) — This enhancement provides a configuration option
for the source IP address field of SNMP response and generated trap PDUs.
To Next Page
Need help?
General