HP ProCurve Wireless Access Point 530 - Sample Network Topologies

2-17
Installing the Access Point 530
Sample Network Topologies
Installing the
Access Point 530
Sample Network Topologies
This section shows you a few sample network topologies in which the
Access Point 530 is implemented. The access point is designed to be deployed
in an integrated configuration with wired Ethernet LANs, providing network
access to wireless stations in the wireless coverage area.
The access point’s radios can be configured to operate in any of the following
modes:
■ infrastructure wireless LAN
■ infrastructure wireless LAN with roaming
■ Wireless Distribution System (WDS) bridge
■ Wireless Distribution System (WDS) repeater
For more topology information, see the ProCurve Networking Web site at:
http://www.procurve.com.