HP ProDesk 400 G1 Microtower User Manual

Replacing the computer access panel
Hold the access panel at an angle and slide the lip on the bottom edge of the access panel onto the
rail on the bottom edge of the chassis (1) then lower the top edge of the access panel onto the
chassis (2) and slide the panel forward (3). Tighten the two thumbscrews (4) to secure the panel in
place.
8 Chapter 2 Hardware upgrades

HP ProDesk 400 G1 Microtower Specifications

General

Brand	HP
Model	ProDesk 400 G1 Microtower
Category	Desktop
Language	English