HP ProLiant DL360 Generation9

QuickSpecs
HPE ProLiant DL360 Generation9 (Gen9)
Standard Features
Page 5
E5-2630v4
2.2GHz
10
25MB
85W
8.0GT/s
2133
E5-2630Lv4
1.8GHz
10
25MB
55W
8.0GT/s
2133
E5-2623v4
2.6GHz
4
10MB
85W
8.0GT/s
2133
E5-2620v4
2.1GHz
8
20MB
85W
8.0GT/s
2133
E5-2609v4
1.7GHz
8
20MB
85W
6.4GT/s
1866
E5-2603v4
1.7GHz
6
15MB
85W
6.4GT/s
1866
E5-2699Av4
2.4 GHz
22
55MB
145W
9.6GT/s
2400
NOTE:
Mixing of E5-2600 v3 and E5-2600 v4 processors is not supported
NOTE: All processors support Hyper-Threading except E5-2609 v4/v3 and E5-2603 v4/v3.
NOTE: Processors consuming up to 120w ship with standard heat sink.
• Processors consuming over 120w ships with a High Performance heat sink as standard.
• A High Performance heat sink can be added to help reduce power consumption (795235-B21).
Chipset
Intel® C610 Series Chipset
Intel® E5-2600v3 Processor Family
Intel® E5-2600v4 Processor Family
NOTE: For more information regarding Intel® chipsets, please see the following
URL: http://www.intel.com/products/server/chipsets/
On System
Management Chipset
HPE iLO (Firmware HPE iLO4 2.0 or later) 4GB NAND
NOTE: 1GB USB user space configurable via UEFI and accessible via iLO. Read and learn more in
the iLO QuickSpecs.
Memory
One of the following
depending on model
Type:
HPE SmartMemory
DDR4 Registered (RDIMM) or Load Reduced (LRDIMM)
DIMM Slots Available
24
(12 DIMM slots per processor, 4 channels per processor, 3 DIMMs per
channel)
Maximum Capacity
(LRDIMM)
3TB
(24 x 128GB LRDIMM)
Maximum Capacity
(RDIMM)
768GB
(24 x 32GB RDIMM)
Maximum Capacity
(NVDIMM)
128GB
(16 x 8GB NVDIMM)*
NVDIMM support only with the E5-2600v4 processors, and RDIMMs only
• 128GB DIMMS cannot be mixed with any other size DIMMs.
• *NVDIMMs cannot be used with LRDIMMs.
• *A maximum of 16 NVDIMMs can be supported.
• NVDIMMs are only supported on factory configured servers with E5-2600 v4 processors, not
supported on servers upgraded from E5-2600 v3 to E5-2600 v4 processors.