Planning a network configuration
You use the Rapid Startup Wiza rd to configure your storage server.
This wizard is displayed automatically when you first start your system,
immediately after you are prompted to install system updates. Before you
run the Rapid Startup Wizard, it is helpful to gather together the network
configuration information you need, including:
• User name and administrator password (the system provides you
with defaults you need to change)
• E-mail addresses to set up system alerts
• SNMP settings
• Local area network (LAN) configuration settings
To help you gather this information, see "Configuring the server on the
network"onpage39.
Configuration checklist
Use the following checklist to make sure you have c ompleted all
configuration tasks for your HP ProLiant storage server. The steps for each
task are explained in more detail in subsequent chapters of this guide.
18 Setup overview
To Next Page
Loading...
