HP ProLiant DL380 G4 - Installation and Configuration Checklist

Table 3 Installa tion and Configuration checklist
Steps
Reference
1. Unpack server, check kit
contents, and become familiar
with front and back panels of
storage server. Locate and
write down serial number of
storage server.
See "Checking kit
contents"onpage22.
2. Complete rail insta llation
instructions.
See the HP ProLiant rail
installation instructions, if
applicable.
3. Connect cables; (optional)
connect a keyboard, mouse,
and monitor; power on server,
and log in to the server.
See "Cabling the
serv er"onpage26,
Powering on the server,and
Direct attach method.
4. Access the HP Storage
Server Management console.
• Direct attach method
• Remote browse method
• Remote desktop method
• iLO method
See "Accessing
the HP Storage
Server Management
console"onpage31.
5. Complete the storage server
configuration worksheet.
See "Server configuration
worksheet"onpage39.
6. Run Rapid Startup Wizard. See "Rapid Startup
Wi zard" on page 42.
7. C o mp l e t e sy s t e m
configuration.
See "Complete sy stem
configuration" on page 43.
8. Configure storage server
for Web access, if necessary.
See "Configuring storage
server for Web access
(optional)" on page 45.
HPProLiantDL380G4StorageServerinstallationguide
19