To connect the storage server to a network using the direct attach method
1. Log in to t he HP ProLiant Stora ge Server Management console with the
default user name administrator and the password hpinvent .
NOTE:
You can change the administrator name and password
when you configure the server using the "Rapid Startup
Wiz ard" on page 42.
2. To complete network configuration using the Rapid Startup Wizard,
see "Configuring the server on the network"onpage39.
Using the Remote browser method
The storage server ships with DHCP enabled on the network port. If the
sever is placed on a DHCP-enabled network and the serial number of
the d evice is known, the server can be accessed through a client running
Internet Explorer 5.5 (or later) on that network, using the TCP/IP 3202 port.
IMPORTANT:
Before you begin this procedure, ensure that you have the following:
• Windows-based PC loaded with Internet Explorer 5.5 (or later) on
the same local network as the storage server
• DHCP-enabled network
• Serial number or IP address of the storage ser ver
To connect the server to a network using th e remote browser method, you
must first ensure that the client is configuredtodownloadsignedActiveX
controls.
To enable ActiveX controls
1. On the remote client machine, open the Internet Explorer web browser
and select Tools>InternetOptions>Security.
32
Accessing the HP Storage Server Management console
To Next Page
Loading...
