Cabling the server
Connect the cables in the sequence shown in the figure below.
45
6
1
2
3
5057
Figure 5 Cable connections
1
Keyboard
4
Network cable
2
Mouse
5
Monitor
3
iLO cable
6
Power cable
NOTE:
Connecting the power cord il luminates the green NIC LEDs. Connecting
the pow er cord also restor es the storage server to whatever previ ous
powered state it was last in. This could result in the server power ing up ,
the fans operating, and the power indicator coming on.
NOTE:
The keyboard, mouse, and monitor are used only for the "Direct attach
method" on page 31. They are not provided with your storage server.
26
Installing the server
To Next Page
Loading...
