4Configurin g t he server on the
network
Before you begin
When first powering on the storage server you need to have some
configuration d ata readily available to complete the Rapid Startup Wiz ard.
Complete the Server confi guration work sheet and use the data collected to
initialize the storage server.
Table 4 Server configuration worksheet
Configuration Worksheet
Administrative Identity
User name
Change system administrator’s user
name, which is set by default to
administrator.
User password Change system administrator’s password,
which is set by default to hpinvent.
Alert E-mail Notification
E-mail address
alert sent to
E-mail address for critical, warning, or
informational messages about server
status.
E-mail address
alertsentfrom
Must be a valid, well-formed e-mail
address that will appear as the sender of
server status e-mail aler ts.
SMTP server
name or IP
address
Must be an e-mail server on your network
that supports the Simple Mail Transfer
Protocol (SMTP).
SNMP Settings (to be completed only if needed)
Contact person
S ystem administrator for the storage
server. The contact and location will be
provided to any SNMP management
computer that requests them.
HPProLiantDL380G4StorageServerinstallationguide
39
To Next Page
Loading...
