Configuration Wo rksheet
System location Any text string, such as a location or
phone number. For example, Floor
#3, Financial Services Bldg.
Community
name No. 1
The community name is used for network
authentication when sending outgoing
SNMP messages.
Trap
destination
No. 1
The IP address of a management
computer that will receive SNMP
messages from the storage server using
the above community name.
Community
name No. 2
Same as above.
Trap
destination
No. 2
Same as above.
Network Interfaces (to be completed for non-DHCP c onfigurations)
Local area
connection 1
A local area connection is automatically
created for each network adapter that is
detected.
IP address An Internet Protocol (IP) address is
assigned to the server. If it is not
automatically assigned, enter the IP
address that you want to assign to this
serv er.
Subnet mask A mask is used to determine what subnet
an IP address belongs to.
Default
gateway
The gateway in a network that the
network adapter will use to access all
other networks.
Local area
connection 2
Any additional local area connections
can be renamed to prevent confusion.
IP address Same as above.
Subnet mask Same as above.
Default
gateway
Same as above.
40
Configuring the server on the network
To Next Page
Loading...
