4. Duri ng reboot, you see the screen below. The storage ser ver performs
the following actions:
•Restoreimage.
•Copyfiles.
• Prepare system settings.
• Boot Windows and finalize setup.
Figure 8 Restore progress screen
CAUTION:
Do not interrupt the reboot sequence; it takes a
considerable amount of time.
By now you should have determined the access method for
yourstorageserver. Formoreinformation,see"Planning for
installation"onpage15.
5. Go to "Accessing the HP Storage Server Management
console" on page 31 to set up server access.
HPProLiantDL380G4StorageServerinstallationguide
29
To Next Page
Loading...
