Removal and replacement procedures 59
To migrate the processor to the spare system board:
1. Install the spare system board.
CAUTION: The pins on the processor socket are very fragile. Any damage to them may require
replacing the system board.
2. Prepare the processor socket on the spare system board:
a. Remove the processor socket protective cover.
b. Open the processor retaining latch and the processor socket retaining bracket.
3. Install the processor socket cover onto the processor socket of the failed system board.
4. Install the processor on the spare system board.
CAUTION:
The processor is designed to fit one way into the socket. Use the alignment guides on
the processor and socket to properly al
ign the processor with the socket. Refer to the server hood
label for specific instructions.
To Next Page
Loading...
