HP ProLiant DL585 - Ilo;Redundant ROM Override Switch (SW5

System LEDs and switches
HP ProLiant DL585 Server User Guide E-19
iLO/Redundant ROM override switch (SW5)
The iLO/Redundant ROM override switch (SW5) is a two-position switch that is
used for miscellaneous purposes. The iLO security override switch allows you full
access to the iLO processor. This access is necessary if you lost your password or if
the iLO boot-block must be flashed.
Figure E-11: iLO/Redundant ROM override switch (SW5)
Table E-13: iLO/Redundant ROM override switch (SW5)
Position Default Function Description Settings
1 Off
iLO security
override
The override allows
the administrator full
access to the iLO
processor.
Open (off)
Normal
Closed (on)
Override
2 Off
Redundant
bootblock
select
Forces booting from
the redundant
bootblock
Open (off)
Normal
Closed (on)
Redundant bootblock (ROM)