HP ProLiant DL585

Server Configuration and Utilities
5-2 HP ProLiant DL585 Server User Guide
ROM-Based Setup Utility
RBSU is a configuration utility that is embedded in the server ROM. RBSU helps
you configure certain server hardware settings and prepare the server for operating
system installation without using diskettes. RBSU enables you to view and establish
server configuration settings during initial system startup, as well as modify them
after the server has been configured.
RBSU performs a wide range of configuration activities including:
• Configuring system devices and installed options
• Viewing system information
• Selecting the operating system
• Selecting the primary boot controller
• Managing storage options
In addition, RBSU includes other features, which are outlined in the “Using RBSU”
section in this chapter.
Navigating RBSU
To navigate RBSU, use the following keys:
• To access RBSU, press the F9 key when prompted during POST.
• To navigate the menu system, use the arrow keys.
• To make selections, press the Enter key.
• To exit RBSU, press the F10 key.
• To return to the previous menu, press the Esc key.