Hardware options installation 38
6.
Install the drive in the carrier.
7. Install the drive.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
8. If removed, install the security bezel ("Security bezel option" on page 36).
9. Connect each power cord to the server.
10. Connect each power cord to the power source.
11. Power up the server (on page 15).
To configure arrays, see the HPE Smart Storage Administrator User Guide on the Hewlett Packard
Enterprise website (http://www.hpe.com/info/smartstorage/docs).
Installing a hot-plug drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
To install the component:
1. If installed, remove the security bezel ("Remove the security bezel (optional)" on page 18).
To Next Page
Loading...
