Hardware options installation 70
o
Slot 2
o Slot 3
8. Install the PCI riser cage (on page 23).
9. Connect the SATA cables to the SATA connectors on the system board.
For slot 2 and 3 cable routing, see "M.2 SSD cabling (on page 83)."
10. Install the access panel (on page 19).
11. Do one of the following:
o Slide the server into the rack.
o Install the server into the rack.
12. Power up the server (on page 15).
Dual 8Gb microSD Enterprise Midline USB device
This server supports the installation of the Dual 8Gb microSD Enterprise Midline USB device on the
server internal USB connector.
To Next Page
Loading...
