HP ProLiant DL785

Possible causes:
• Corrupted operating system
• Hard drive subsystem problem
• Incorrect boot order setting in RBSU
Refer toItem
HP ROM-Based Setup Utility User Guide (http://www.hp.com/servers/smartstart)
1
“POST problems flowchart” (page 81)2
• "Hard drive problems" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation
CD or on the HP website (http://www.hp.com/support)
• Controller documentation
3
“HP Insight Diagnostics” (page 67)or in the HP ProLiant Servers Troubleshooting Guide located on the
Documentation CD or on the HP website (http://www.hp.com/support)
4
• "CD-ROM and DVD drive problems" in the HP ProLiant Servers Troubleshooting Guide located on the
Documentation CD or on the HP website (http://www.hp.com/support)
• Controller documentation
• “Loose connections” (page 74)
5
"General memory problems are occurring" in the HP ProLiant Servers Troubleshooting Guide located on
the Documentation CD or on the HP website (http://www.hp.com/support)
6
• "Operating system problems" in the HP ProLiant Servers Troubleshooting Guide located on the
Documentation CD or on the HP website (http://www.hp.com/support)
• “HP contact information” (page 97)
7
• "Hardware problems" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation
CD or on the HP website (http://www.hp.com/support)
• Server maintenance and service guide, located on the Documentation CD or the HP website (http://
www.hp.com/products/servers/platforms)
8
“General diagnosis flowchart” (page 77)9
Troubleshooting flowcharts 83