EasyManuals Logo

HP ProLiant ML350p Gen8 User Manual

HP ProLiant ML350p Gen8
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #112 background imageLoading...
Page #112 background image
Software and configuration utilities 112
5.
Press the Enter key to clear the warning.
6. Enter the serial number and press the Enter key.
7. Select Product ID. The following warning appears:
Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.
8. Enter the product ID and press the Enter key.
9. Press the Esc key to close the menu.
10. Press the Esc key to exit RBSU.
11. Press the F10 key to confirm exiting RBSU. The server automatically reboots.
Utilities and features
Array Configuration Utility
ACU is a utility with the following features:
Runs as a local application or remote service accessed through the HP System Management Homepage
Supports online array capacity expansion, logical drive extension, assignment of online spares, and
RAID or stripe size migration
Suggests the optimum configuration for an unconfigured system
For supported controllers, provides access to licensed features, including:
o Moving and deleting individual logical volumes
o Advanced Capacity Expansion (SATA to SAS and SAS to SATA)
o Offline Split Mirror
o RAID 6 and RAID 60
o RAID 1 (ADM) and RAID 10 (ADM)
o HP Drive Erase
o Video-On-Demand Advanced Controller Settings
Provides different operating modes, enabling faster configuration or greater control over the
configuration options
Remains available any time that the server is on
Displays on-screen tips for individual steps of a configuration procedure
Provides context-sensitive searchable help content
Provides diagnostic and SmartSSD Wear Gauge functionality on the Diagnostics tab
ACU is now available as an embedded utility, starting with HP ProLiant Gen8 servers. To access ACU, use
one of the following methods:
If an optional controller is not installed, press F10 during boot.
If an optional controller is installed, when the system recognizes the controller during POST, press F5.
For optimum performance, the minimum display settings are 1024 × 768 resolution and 16-bit color. Servers
running Microsoft® operating systems require one of the following supported browsers:

Table of Contents

Other manuals for HP ProLiant ML350p Gen8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant ML350p Gen8 and is the answer not in the manual?

HP ProLiant ML350p Gen8 Specifications

General IconGeneral
ProcessorIntel Xeon E5-2600 series
Maximum Processors2
ChipsetIntel C600 Series
Memory TypeDDR3 RDIMM or UDIMM
Maximum Memory768 GB
Memory Slots24 DIMM slots
RAID SupportHP Smart Array P420i/1GB FBWC
Storage ControllerHP Smart Array P420i/1GB FBWC
Network ControllerHP Ethernet 1Gb 4-port 331FLR Adapter
Form FactorTower
StorageSAS, SATA, SSD
NetworkGigabit Ethernet
Power Supply460W, 750W, 1200W
Power Supply OptionsRedundant Power Supplies
Operating System SupportMicrosoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware

Related product manuals