PCI Riser Card Cage Assembly
1. Prepare the computer for disassembly (Preparation for Disassembly on page 61).
2. Remove the computer cover (
Computer Cover on page 64).
3. Disconnect the cables from the expansion cards mounted in the card cage as needed.
4. Remove all PCI and PCI Express expansion cards from the PCI expansion slots (
PCI Card in the
Riser Card Cage on page 78).
5. Grasp the riser card cage and firmly pull it straight up and out of the chassis.
Figure 7-30 Removing the Riser Card Cage
To install the card cage, reverse the removal procedure.
ENWW Expansion Cards 85
To Next Page
Loading...
