• Windows Vista
• Windows 7
• Windows Server 2012 Datacenter
HP StoreVirtual VSA on Windows Server 2012
• The VSA installer will run on Windows Server 2012. Deploying a VSA for Hyper-V or a Failover
Manager from a Windows Server 2012 system is supported.
• vCenter installation on Windows Server 2012 is currently not supported by VMware. Consequently,
using the VSA installer for Zero-to-VSA deployments is only supported when vCenter is installed
on a Windows operating system other than Windows 2012.
HP LeftHand Failover Manager for VMware vSphere
• VMware ESX Server version 4.x or later
• Microsoft .Net 4.5 or later on the installer client
• 1 GB RAM
• Bridged connection through the VMware Console, or assigned network in VI Client
• 15 GB of disk space
HP LeftHand Failover Manager for Microsoft Hyper-V
• Windows Server 2012 Datacenter
• Windows Server 2008 versions
2008 R2 Standard◦
◦ 2008 R2 Enterprise
◦ 2008 R2 Datacenter
◦ 2008 R2 Server Core
◦ 2008 SP2, except for Core, which is not supported
• 15 GB available drive space on Windows server for the Failover Manager
• Hyper-V role installed and running
• At least 1 GB of memory reserved for the Failover Manager
• A single virtual CPU with at least 2000 MHz reserved
Version requirements
To upgrade to version 10.0 SAN/iQ software, the storage systems must be at version 7.0.01 SP1 or
later. If the storage systems are at a lower version, please contact Customer Support for access to the
interim upgrade files. See “HP technical support” (page 22) for customer support contact information.
If you are upgrading to version 10.0 from version 7.0 SP1, you must manually upgrade first to version
8.0. From version 8.0, Online Upgrades will first upgrade to version 9.5 and then upgrade to version
10.0.
Upgrading the SAN
Automatic Online Upgrades are supported in version 9.x or later. See the HP LeftHand SAN Solution
Upgrade for more information.
NOTE: Patches 10136 and 10137, which contain a firmware update for the RAID controller on
specific platforms, are automatically applied during the 10.0 upgrade.
10 Version requirements
To Next Page
Loading...
Need help?
General