HP T5530 - Compaq Thin Client User Manual

NOTE: You can set only primary connections to automatically reconnect.
6. In the Persistent column, if the entry for the selected connection is No, click on No to change it
to Yes.
7. To arrange the order of connections, select a connection and click the up and down arrows.
Secondary connections are associated with the first primary connection above them in the list.
8. Click Apply to save your changes.
NOTE: You can set only primary connections to automatically connect when HP ThinConnect is
launched.
Configuring the User Interface
The Global UI tab on the Advanced window allows you to configure HP ThinConnect to start
automatically and allows you to set up Kiosk mode.
Auto Starting HP ThinConnect
You can enable automatic log on, which causes HP ThinConnect to start automatically when the user
logs in to Windows.
To auto start HP ThinConnect:
1. In the HP ThinConnect window, click Advanced.
2. Click the Global UI tab.
3. Select Auto start HP ThinConnect when logging into Windows.
4. Click Apply to save changes.
ENWW Configuring the User Interface 17

HP T5530 - Compaq Thin Client Specifications

General

Brand	HP
Model	T5530 - Compaq Thin Client
Category	Server
Language	English