Programs
ThinPrint
The following steps illustrate how to set up ThinPrint over TCP/IP. ThinPrint can also be used for ICA/
RDP sessions, provided a TCP/IP connection exists between server and client. You must set up
ThinPrint on the server before attempting any ThinPrint jobs. For more information about how to set up
the server, see
http://www.thinprint.com.
ThinPrint over TCP/IP
1. Connect a local printer to the thin client.
NOTE: Windows CE assigns LPT1 to the parallel port and LPT2 to the USB port.
2. Open ThinPrint by selecting the icon on the Windows task bar or by clicking Start > Programs >
ThinPrint.
ENWW Programs 73
To Next Page
Loading...
