Date/Time
The Date/Time Properties dialog box allows you to set the date and current time, select the appropriate
time zone, and enable automatic clock adjustment for daylight savings time for the terminal.
▲
Select the appropriate date and time information, and then click Apply.
DHCP Options
The DHCP Options page allows you to configure the thin client with tags (see the Codes column in the
illustration below) that identify the FTP location of the update image that the client retrieves from the
FTP server. If you set these tags, the Value column will be populated automatically with the FTP server
location. Each time the system boots, it will check these fields for a file server (or FTP server) and will
look for system updates. Use the Power Settings utility to schedule wakeup and shutdown times to make
sure the system is updated regularly.
NOTE: For information about resetting thin client settings to factory defaults, see the System
on page 65 section later in this chapter.
ENWW
Date/Time
25
To Next Page
Loading...
Need help?
General