To enable a port, select the appropriate check box, and then click OK.
Power Settings
The Power Settings dialog box allows you to configure settings such as BIOS wake-up, shutdown, power
state after power failure, and alarm settings.
BIOS Wakeup Alarm: Set the time of day the thin client wakes up. You must first reboot and then shut
down the unit for this feature to work.
Enable Wake On LAN: Select to enable the power in the client to be turned on by the network.
PWRON State After Power Fail: Select whether power is to be on/off or defaults to its former state
after a power failure.
Set Alarm: Select the day(s) that the thin client wakes up. You must first reboot and then shut down the
unit for this feature to take affect.
ENWW
Power Settings
51
To Next Page
Loading...
