HP Easy Config
HP Easy Config allows the administrator to easily configure the thin client for one of 4 different pre-
configured modes. In general HP Easy Config will configure three groups of settings: a connection, an
additional user and kiosk mode for the user interface selected.
Configuration modes:
●
Default Desktop
●
VMware View Appliance
●
Citrix Desktop Appliance
●
Web Appliance
Default Desktop is the default mode of the thin client. In this mode, the client boots in standard desktop
mode without making any default connections.
NOTE: To log out of the selected appliance mode, press Ctrl + Alt + the up arrow and a log off button
will appear in the bottom right corner. Press Ctrl + Alt + the down arrow to make the log off button
disappear.
To return to the Default Desktop mode, log out of the selected Appliance mode. During the Automatic
Log On screen, press Esc and the Administrator login screen will appear. Log in as Administrator and
use Easy Config to switch back to Default Desktop mode.
34 Chapter 4 Control Panel ENWW
To Next Page
Loading...
Need help?
General