NOTE: The printer name must match the printer name set up on the server.
4. If configuring an LPD Printer:
a. Select LPD Printer.
b. Type the Printer name.
c. Type the printer’s IP address in the Printer address field.
NOTE: The printer name must match the printer name set up on the server.
5. Click OK to save settings and close the Network Printer window.
6. On the Assignment tab, select the check box next to the printer you just set up.
7. Click OK to save settings and close ThinPrint.
78 Chapter 5 Programs and Add-ons ENWW
To Next Page
Loading...
