Table 4-2 Computer Setup—File
Option Description
System Information Lists:
● Product name
●
SKU number (some models)
●
Processor type/speed/stepping
● Cache size (L1/L2)
●
Installed memory size/speed, number of channels (single or dual) (if applicable)
●
Integrated MAC address for embedded, enabled NIC (if applicable)
● System BIOS (includes family name and version)
●
Chassis serial number
●
Asset tracking number
About Displays copyright notice.
Set Time and Date Allows you to set system time and date.
Flash System ROM Allows you to update the system ROM with a BIOS image file located on removable media.
Replicated Setup Save to Removable Media
Saves system configuration to a formatted USB flash media device.
Restore from Removable Media
Restores system configuration from a USB flash media device.
Default Setup Save Current Settings as Default
Saves the current system configuration settings as the default to be used whenever “Apply
Defaults and Exit” is selected.
Restore Factory Settings as Default
Loads the original factory system configuration settings for use by a subsequent “Apply Defaults
and Exit” action.
Apply Defaults and
Exit
Applies the currently selected default settings.
Ignore Changes
and Exit
Exits Computer Setup without applying or saving any changes.
Save Changes and
Exit
Saves changes to system configuration or default settings and exits Computer Setup.
Computer Setup—Storage
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 4-3 Computer Setup—Storage
Option Description
34 Chapter 4 Computer Setup (F10) Utility, BIOS Settings
To Next Page
Loading...
Need help?
General
