Operation
HP TFT5110R User Guide 3-15
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: d-ch3 Operation
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 10:18 AM
OSD Size
This option contains a sub-menu:
• Normal
• Double
Up (+) moves up a selection in the OSD Size menu list and activates that choice.
Down (-) moves down a selection in the OSD Size menu list and activates that
choice.
Select exits the OSD Size menu list leaving the last selection as the new default.
OSD Size is a Global setting.
Normal
OSD size is set to normal character size.
Double
OSD size is set to double character size. The OSD position is adjusted if necessary
to remain visible on the screen.
OSD Timeout
This option displays a slider bar at the right side of the OSD display to allow the
adjustment of OSD Timeout. The timeout ranges from 5 to 55 seconds with
5-second intervals. The default setting is 10 seconds.
OSD Timeout is a Mode setting.
• Up (+) increases the time the OSD remains displayed.
• Down (-) decreases the time the OSD remains displayed.
• Select accepts the current value and exits the slider bar.
To Next Page
Loading...
Need help?
General
